MZ/MuZ Riders

1. Shop Manual or source to buy one

2. Ignition with Key (new or used ok)

3. Fuel Tank Gas Cap that fits Ignition Key (new or used ok)

Note on 2 and 3: Were these parts also fitted other manufacturers bikes...if so ..which ones so I can check dealers or parts sources.

4. Someone in USA that can help me make my X racer street legal. I have most of the street parts. I live in Pennsylvania.

Thanks so much


Mike Barone

Hi,
I had the same issues with my x race bike. Mine had an ignition switch and no key,also it was wired to a toggle switch for ignition.NOT legal for street use. I found that a switch from a Guzzi was the same. Do you have
the switch mounted or is it missing? My gas cap opens with a screwdriver
(flat blade) if necessary.
The manuals were available through mzna,but outta business now.They
really only were photo copies and a parts book.Some wiring diagrams
etc are avail through MZOG@yahoo..
In PA I guess you need lights, turn signals, reflectors etc...pretty easy
stuff..my speedo does not work so I hooked up a digital bicycle speedo
works great...
The owner I bought mine from finally found a key for the ignition.....so ididn't have to mount the Guzzi switch..I'll see if i can find it...
Chip

Thx.....lots

Mike

basser23 wrote:Hi,
I had the same issues with my x race bike. Mine had an ignition switch and no key,also it was wired to a toggle switch for ignition.NOT legal for street use. I found that a switch from a Guzzi was the same. Do you have
the switch mounted or is it missing? My gas cap opens with a screwdriver
(flat blade) if necessary.
The manuals were available through mzna,but outta business now.They
really only were photo copies and a parts book.Some wiring diagrams
etc are avail through MZOG@yahoo..
In PA I guess you need lights, turn signals, reflectors etc...pretty easy
stuff..my speedo does not work so I hooked up a digital bicycle speedo
works great...
The owner I bought mine from finally found a key for the ignition.....so ididn't have to mount the Guzzi switch..I'll see if i can find it...
Chip

Mike,
If you go to MZOG@yahoo.com and join,you'll have access to manuals.
Look in the files section, most are in pdf format.just pulled a carb manual
from there...lots of good info too..