Anyone know the correct setting for the idle mix screw on the Bing carb? This is the adjuster closest to the rubber intake right below the carb throat.
How many turns out from fully turned in should I have?
Thanks
Ryan
MZ/MuZ Riders
A community for owners and riders or MZ Motorcycles, Scooters, and ATVs.
Bing idle mix adjustment
Moderators: DAVID THOMPSON, phlat65
3 posts
• Page 1 of 1
Bing idle mix adjustment
by 95SaxonTour » Fri Mar 01, 2013 11:19 am
- 95SaxonTour
- Posts: 77
- Joined: Thu Jul 30, 2009 8:32 pm
Re: Bing idle mix adjustment
by DAVID THOMPSON » Fri Mar 01, 2013 5:36 pm
bmw r75/5 book says .5 to 1 turn almost same carb
my bike was set a .75 turn out thats a good place to start
its a saxon tour
this motor should idle faster than most singles as its a short stroke motor
i would play with mix at about 1200 to 1400 rpm
its been 2007 since i had mine running
some one tell us the proper idle rpm
and is not real slow
i have a bing book i am looking for it
dave
my bike was set a .75 turn out thats a good place to start
its a saxon tour
this motor should idle faster than most singles as its a short stroke motor
i would play with mix at about 1200 to 1400 rpm
its been 2007 since i had mine running
some one tell us the proper idle rpm
and is not real slow
i have a bing book i am looking for it
dave
Dave 2002 MZ RT125+1995 Saxon Tour(500cc)
1997 MZ 660 Traveller+6/13/09 WV USA
"IN the end times the IDIOTS will be in charge
of everything"
"I like the road less traveled if it's PAVED!"
wd8cyv at yahoo dot com
1997 MZ 660 Traveller+6/13/09 WV USA
"IN the end times the IDIOTS will be in charge
of everything"
"I like the road less traveled if it's PAVED!"
wd8cyv at yahoo dot com
-
DAVID THOMPSON - Moderator
- Posts: 5162
- Joined: Sun Nov 23, 2003 11:01 am
- Location: Parkersburg, West Virginia USA .questions answered MZ 95 up, BMW 1953 to 1979 and ham radio WD8CYV
Re: Bing idle mix adjustment
by metric » Sat Mar 02, 2013 4:46 pm
My Silver Star owner's manual says:
Mixture screw: approx. 3/4 open
Idle speed: approx. 1100 rpm
Mixture screw: approx. 3/4 open
Idle speed: approx. 1100 rpm
- metric
- Posts: 46
- Joined: Sat Mar 29, 2008 11:26 am
- Location: New York, USA
3 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 38 guests