125 RT START ENGINE

SM, SX, RT, FunX, and models re-branded as ATK in U.S.

Moderators: DAVID THOMPSON, phlat65

125 RT START ENGINE

Postby loykatoni » Thu Jan 21, 2010 6:47 pm

I HAVE A PROBLEM WITH MY BIKΕ,Ι FELLWITH MY BIKE.AFTER THE FALL I HAVE DEALT WITH THE FOLLOWING SITUATIONS:SOMETIMES THE STARTER DOESNT WORK ,WHEN IT DOES WORK ,IT SOUNDS LIKE IT STILL PROVIDES POWER TO THE ENGINE,DESPITE THE FACT THAT THE MOTOR IS RUNNING,THERE IS A MATTALIK NOISE NEAR THE GEAR BOX.THIS PROBLEMS SEEMS TO HAVE EMTIED THE BATTERY.COULD YOU POSSIBLY OFFER ME ANY SUGGESTIONS,FOR WHAT MIGHT DE HAPPENING??? :cry: :cry: :cry: :cry: :cry: :cry: :cry:
loykatoni
 
Posts: 4
Joined: Thu Jan 21, 2010 6:19 pm

Re: 125 RT START ENGINE

Postby DAVID THOMPSON » Thu Jan 21, 2010 10:05 pm

under the seat just behind the bolt that holds the gas tank on is the starter relay..
some times they fail
in at least one case a rider reported to me that its contacts stuck on....making motor crank
also the switch on the handle bar may be sticking ..it may have been damaged but is not showing damage
dave
Dave 2002 MZ RT125+1995 Saxon Tour(500cc)
1997 MZ 660 Traveller+6/13/09 WV USA
"IN the end times the IDIOTS will be in charge
of everything"
"I like the road less traveled if it's PAVED!"
wd8cyv at yahoo dot com
User avatar
DAVID THOMPSON
Moderator
 
Posts: 5161
Joined: Sun Nov 23, 2003 11:01 am
Location: Parkersburg, West Virginia USA .questions answered MZ 95 up, BMW 1953 to 1979 and ham radio WD8CYV

Re: 125 RT START ENGINE

Postby loykatoni » Fri Jan 22, 2010 7:44 am

thanks for the advice, i will check it..
loykatoni
 
Posts: 4
Joined: Thu Jan 21, 2010 6:19 pm

Re: 125 RT START ENGINE

Postby loykatoni » Mon May 03, 2010 1:21 pm

thanks that was the problem.. :-)
loykatoni
 
Posts: 4
Joined: Thu Jan 21, 2010 6:19 pm

Re: 125 RT START ENGINE

Postby loykatoni » Mon May 03, 2010 1:57 pm

What is the amaunt of preasure in the front/rear tire for RT 125
loykatoni
 
Posts: 4
Joined: Thu Jan 21, 2010 6:19 pm

Re: 125 RT START ENGINE

Postby stephendacosta » Sun May 16, 2010 6:07 am

That depends of the manufacturer of the tire. For optimum wear, reduce the recommended pressure on the tire sidewall by 10%. This bit of information is from a tire engineer for Goodyear. For maximim cornering footprint, you would use a lower pressure; I have not worked out what is best, yet. David Thompson might have a little more experience for that.--Steve
Stephen DaCosta
1995 Skorpion Sport; ten-MZ 125's;2009 BMW G650GS;1981 GS450 Suzuki Roadracer
stephendacosta
 
Posts: 125
Joined: Sat Nov 24, 2007 3:28 pm
Location: USA, Chagrin Falls, OH Near Cleveland

Re: 125 RT START ENGINE

Postby djsbriscoe » Sun May 16, 2010 9:14 am

Hi,
From the user manual.
26 psi front, 33 psi rear at <=150KG weight.
maximum load 26 psi front and 38 psi rear.

David.
Bikes:2006 RT125 (sold Jan 2013),2001 Skorpion Traveller (sadly sold) Current bike Honda NC750X DCT (2014)
Past owner of original ETZ125,ETZ251,Kanuni ETZ251 models
Location:London UK
Electronics tech by trade.
djsbriscoe
 
Posts: 341
Joined: Sun Aug 21, 2005 12:55 pm
Location: London,UK


Return to 125 cc

Who is online

Users browsing this forum: No registered users and 91 guests