Skorpion Parts Needed

[Team222]

1. Shop Manual or source to buy one

2. Ignition with Key (new or used ok)

3. Fuel Tank Gas Cap that fits Ignition Key (new or used ok)

Note on 2 and 3: Were these parts also fitted other manufacturers bikes...if so ..which ones so I can check dealers or parts sources.

4. Someone in USA that can help me make my X racer street legal. I have most of the street parts. I live in Pennsylvania.

Thanks so much


Mike Barone

[basser23]

Hi,
I had the same issues with my x race bike. Mine had an ignition switch and no key,also it was wired to a toggle switch for ignition.NOT legal for street use. I found that a switch from a Guzzi was the same. Do you have
the switch mounted or is it missing? My gas cap opens with a screwdriver
(flat blade) if necessary.
The manuals were available through mzna,but outta business now.They
really only were photo copies and a parts book.Some wiring diagrams
etc are avail through MZOG@yahoo..
In PA I guess you need lights, turn signals, reflectors etc...pretty easy
stuff..my speedo does not work so I hooked up a digital bicycle speedo
works great...
The owner I bought mine from finally found a key for the ignition.....so ididn't have to mount the Guzzi switch..I'll see if i can find it...
Chip

[Team222]

Thx.....lots

Mike

Hi,
I had the same issues with my x race bike. Mine had an ignition switch and no key,also it was wired to a toggle switch for ignition.NOT legal for street use. I found that a switch from a Guzzi was the same. Do you have
the switch mounted or is it missing? My gas cap opens with a screwdriver
(flat blade) if necessary.
The manuals were available through mzna,but outta business now.They
really only were photo copies and a parts book.Some wiring diagrams
etc are avail through MZOG@yahoo..
In PA I guess you need lights, turn signals, reflectors etc...pretty easy
stuff..my speedo does not work so I hooked up a digital bicycle speedo
works great...
The owner I bought mine from finally found a key for the ignition.....so ididn't have to mount the Guzzi switch..I'll see if i can find it...
Chip

[basser23]

Mike,
If you go to MZOG@yahoo.com and join,you'll have access to manuals.
Look in the files section, most are in pdf format.just pulled a carb manual
from there...lots of good info too..