Camshaft settings

[Jamie]

Can anyone help,
with either the settings to re install the overhead cams,
or where i can find the service manual for a 2005 125 SM

[djsbriscoe]

Hi,
The following MZ special tools are required to reinstall/set the camshafts. I've done this work myself and it's not too difficult a job.
It's also best if you put new gaskets on the chain tensioner and valve cover. It goes without saying that you'll need a torque wrench as well.

Crankshaft locking bolt 8999200000
Camshaft adjust tool 8999206000

All parts available from Grahams motorcycles in Taunton, Somerset (parts may take a while to arrive because of recent change in management at MZ in Germany)

Here is a zip file of the RT125 manual

MZ 125 RT Repair Manual OCR'd.zip

MZ RT125 Manual

(5 MiB) Downloaded 233 times

HTH,

David

[Jamie]

Thanks mate, that made things so much easier.
I wondered what the bolt was in the front of the engine, and now i know.

Managed without the special tools found a bolt long enough, and using a spanner on the cams, got over the other special tool.

Re assembled the engine only to find the starter relay was just clicking, so it may mean a trip to Grahams in Taunton.
Many thanks for your prompt reply.


Jamie