MZ/MuZ Riders
A community for owners and riders or MZ Motorcycles, Scooters, and ATVs.
starter relay
Moderators: DAVID THOMPSON, phlat65
4 posts
• Page 1 of 1
starter relay
by mz660r » Fri Feb 18, 2005 5:02 am
hello all. i put my bike back together this past few days and i noticed that the bike is not running. seems like the stater relay is not working. i did a bypass and got the stater motot to crank but i got sparks frm that. what can i do to test out the starter relay or fix it. does not seem repairable. thanks
2001 mz 660 skorpion
- mz660r
- Posts: 32
- Joined: Mon Jun 28, 2004 9:39 pm
by phlat65 » Fri Feb 18, 2005 10:32 am
I assume you have checked the interupt system? handle bar kill switch, side stand switch..
check the resistance of the pull in coil, I would guess it is around 20-40 ohms.
does it click when try to start?
that will get you started
check the resistance of the pull in coil, I would guess it is around 20-40 ohms.
does it click when try to start?
that will get you started
2001 MZ Black Panther
2001 Suzuki RM125 (full Enduro)
Old Hondas- TT500 Ascott, 305 Dream Touring
2001 Suzuki RM125 (full Enduro)
Old Hondas- TT500 Ascott, 305 Dream Touring
-
phlat65 - Moderator
- Posts: 735
- Joined: Thu Nov 13, 2003 1:05 am
- Location: Seattle
by DAVID THOMPSON » Fri Feb 18, 2005 12:46 pm
yamaha relay part number 4KD-81940-00
is a direct replacement on my mz rt125 about $28 usd at
aftermarket atv shop
it may also work on your bike
unhook battery when changing
ar dave
is a direct replacement on my mz rt125 about $28 usd at
aftermarket atv shop
it may also work on your bike
unhook battery when changing
ar dave
Dave 2002 MZ RT125+1995 Saxon Tour(500cc)
1997 MZ 660 Traveller+6/13/09 WV USA
"IN the end times the IDIOTS will be in charge
of everything"
"I like the road less traveled if it's PAVED!"
wd8cyv at yahoo dot com
1997 MZ 660 Traveller+6/13/09 WV USA
"IN the end times the IDIOTS will be in charge
of everything"
"I like the road less traveled if it's PAVED!"
wd8cyv at yahoo dot com
-
DAVID THOMPSON - Moderator
- Posts: 5162
- Joined: Sun Nov 23, 2003 11:01 am
- Location: Parkersburg, West Virginia USA .questions answered MZ 95 up, BMW 1953 to 1979 and ham radio WD8CYV
by mz660r » Fri Feb 18, 2005 3:32 pm
i'm not getting any power when the relay is installed. a few days a ago it was clickinh alot when i try to start it i asumed cause the battery was low. but it rode fine then i took apart the bike and tried to start is with no luck the killt switch on the handle bars is run and the kick stand is up tried to start it but absolutely no power. only time i had power to the starter was when i bypassed the relay and directly had the wires connect.
ote="phlat65"]I assume you have checked the interupt system? handle bar kill switch, side stand switch..
check the resistance of the pull in coil, I would guess it is around 20-40 ohms.
does it click when try to start?
that will get you started[/quote]
ote="phlat65"]I assume you have checked the interupt system? handle bar kill switch, side stand switch..
check the resistance of the pull in coil, I would guess it is around 20-40 ohms.
does it click when try to start?
that will get you started
[/quote]2001 mz 660 skorpion
- mz660r
- Posts: 32
- Joined: Mon Jun 28, 2004 9:39 pm
4 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 101 guests