Silver Star clutch lever

[metric]

Through my carelessness I have broken the clutch lever of my Silver Star this morning. So I am reduced to riding my Vespa to work. Can any of you tell me what "normal" motorcycle has the same lever, or where (prefereably in the USA) I can buy a replacement? My lever is black and is marked "Domino" on the lower surface. Or perhaps someone here has one for sale....

[DAVID THOMPSON]

http://www.herdan.com/
610-562-3155
tell them what your looking for its same as rt125 lever
at least on my 95 saxon tour

also bikeworx boston mass area motorcycle shop

in the dealers section
mz Miami cuban guy selling 2 smoker parts but he may have one

viewtopic.php?f=18&t=4260
mr bill orders from the factory they drop ship to you takes about 2 weeks

i am out of stock broke 2 in the last 2 months
the clutch and brake lever is common only to MZ

best on the clutch to mount the perch and lever from some other bike
put the compression release on some thing else
but do make it some thing common and write down what it is

your stuck with the brake side unless you do a master cylinder from a jap bike or early 80's bmw
dave

[comanche91]

As Dave mentioned, Disney in Miami has them here:

http://www.mzpartsmiami.com/PRODUCTOS---SPARE-PARTS.html

Down near the bottom of the page:

ETZ ,TS #14
MANILLA DE CLOCHE O DE FRENO
Price: $10.00

Works on the Silver Star

[metric]

Thank you Dave and Don. I tried calling Herdan and got no reply, called Bikeworx (where I've done business in the past) and they did not have the lever; they referred me to Graham's Motorcycles in UK. I then bought the lever using MZ Parts Miami's online store. I'll post a report once the item arrives.

[radiograf]

Check out the following link http://www.domino-group.com as Domino are an Italian aftermarket parts supplier. They don't list anything for MZ so I suspect you have an universal lever and bracket.

[DAVID THOMPSON]

ALL I KNOW
is i went through a local dealers stock of about 3,000 levers
and there was NO match to any thing for that lever
here in the usa
any one that knows what else it fits ????

HE HAD LEVERS GOING BACK OVER 35 YEARS
FROM LINK IN ABOVE POSTS
searching pictures and read an .xls file
i think 0818.71 is the mfg number
but it is only supplied to bikes for the EU market
in 50 cc engine sizes



LEVERLEVER

[radiograf]

Any chance of a picture, with a rule for scale?

[radiograf]

Check out Steve Goode motorcycles, he has a small stock of MZ items, including Domino clutch levers. You can email him at stevejgoode@aol.com. , or check out his ebay store Steve-Goode-Motorcycles

domino lever.jpg (8.14 KiB) Viewed 7130 times

This is the lever Steve has on ebay uk at the moment.

[DAVID THOMPSON]

both the clutch and brake are odd to any thing i can find in the usa
dave

and used on all 3 of my mz bikes

[metric]

The day after I ordered the lever from MZ Parts Miami I received an email from Disney Ferras asking me to clarify the order. When I told him the lever was for a Silver Star he suggested the one shown in these pictures which he emailed to me.

I explained that the lever appears to be correct, but that the perch, which I don't need, is different because of the decompressor. Disney agreed to sell me the lever without the perch for $25 including shipping. While this is more than the price on the website, it seems reasonable to me, and will get the bike back on the road again in a few days. I appreciate Disney's concern in getting me the correct part rather than simply sending the part I ordered, which might not have worked.

[comanche91]

I always call Disney (or email) first explaining what I need just to let him know it's Silver Star specific. He was very helpful with by recent Silver Star cafe conversion, especially when I stupidly broke the Rotax engine clutch cover. Glad it worked out for you. I pretty sure the ETZ lever would have worked for you though.