Mz etz 251 problem..

This is the forum for general motorcycle talk.
Introduce your self here, tell us about your bike and maybe find other enthusiasts to ride with.

Moderators: DAVID THOMPSON, 125SMash, phlat65

Mz etz 251 problem..

Postby Sj0rre » Mon Jul 13, 2015 4:57 am

Hello I'm a new member from Sweden and I have a problem with my mz etz 251.
It won't Rev over 1000/1200 rpm i give it full throttle but it just won't Rev what can the problem be?
Sj0rre
 
Posts: 6
Joined: Mon Jul 06, 2015 5:37 pm

Re: Mz etz 251 problem..

Postby DAVID THOMPSON » Mon Jul 13, 2015 1:35 pm

look in the back of carb with the rubber boot removed
and see if it is actually moving the slide up in the carb

may have a broken throttle cable or it has come loose at carb or handle
may have pulled the brass end off the cable

you should always carry a spare clutch and throttle cable

unless you like walking home
they work good but i learned long ago it will always break when your max distance from your spares
Dave 2002 MZ RT125+1995 Saxon Tour(500cc)
1997 MZ 660 Traveller+6/13/09 WV USA
"IN the end times the IDIOTS will be in charge
of everything"
"I like the road less traveled if it's PAVED!"
wd8cyv at yahoo dot com
User avatar
DAVID THOMPSON
Moderator
 
Posts: 5161
Joined: Sun Nov 23, 2003 11:01 am
Location: Parkersburg, West Virginia USA .questions answered MZ 95 up, BMW 1953 to 1979 and ham radio WD8CYV

Re: Mz etz 251 problem..

Postby Sj0rre » Mon Jul 13, 2015 4:29 pm

The throttle cable is working, took it apart and noticed that the contact breaker is worn-out so I ordered a new one.
Sj0rre
 
Posts: 6
Joined: Mon Jul 06, 2015 5:37 pm

Re: Mz etz 251 problem..

Postby DAVID THOMPSON » Mon Jul 13, 2015 4:54 pm

yes points do not last forever.. be nice if they did
Dave 2002 MZ RT125+1995 Saxon Tour(500cc)
1997 MZ 660 Traveller+6/13/09 WV USA
"IN the end times the IDIOTS will be in charge
of everything"
"I like the road less traveled if it's PAVED!"
wd8cyv at yahoo dot com
User avatar
DAVID THOMPSON
Moderator
 
Posts: 5161
Joined: Sun Nov 23, 2003 11:01 am
Location: Parkersburg, West Virginia USA .questions answered MZ 95 up, BMW 1953 to 1979 and ham radio WD8CYV

Re: Mz etz 251 problem..

Postby Sj0rre » Mon Jul 20, 2015 8:42 am

So got new points and installed them but still no difference
Sj0rre
 
Posts: 6
Joined: Mon Jul 06, 2015 5:37 pm

Re: Mz etz 251 problem..

Postby vicar » Mon Jul 20, 2015 11:32 am

Can you make a little video with your phone showing what happens when you twist the throttle it would help if we could hear the engine
If only one bike was enough..............
vicar
 
Posts: 111
Joined: Tue Jul 31, 2012 5:14 pm
Location: southport merseyside

Re: Mz etz 251 problem..

Postby Sj0rre » Mon Jul 20, 2015 1:10 pm

Well it looks like a seal is bad and the engine is getting filled up with gas..where can I order a set of seals gaskets an bearings..
Sj0rre
 
Posts: 6
Joined: Mon Jul 06, 2015 5:37 pm

Re: Mz etz 251 problem..

Postby therealche » Mon Jul 20, 2015 3:40 pm

ES250 Doppelport, ES250, ES250/1, ES250/2,ETS 250, ES150, ETS150, BK350, IWL Pitty, SR56 Wiesel, SR59 Berlin, Troll............ and thats just the German two strokes!
http://thecomeconcollection.blogspot.com/
therealche
 
Posts: 685
Joined: Mon Mar 19, 2012 6:44 pm
Location: Bradford, West Yorkshire


Return to Main Lobby

Who is online

Users browsing this forum: No registered users and 171 guests