Skorpion substitute part database- please add!

[crunchybits4]

The footpeg rubbers for skorpion sport etc, are yamaha part #2GH-27413-00 used on many yamaha models
http://www.yamahapartspro.com/oemparts/p/yamaha/2gh-27413-00-00/-cover-footrest

p.s this topic should be "sticky" so it's easier to fiind

[Chuck in Indiana]

years and models would help

a lot of us have no clue what a Guzzi spine frames is
i my self have been riding over 60 years and have never rode one
and once in a while i see one
its over 220 mile round trip to the nearest dealer

dave

Oh, sorry. That would be the 97 V10 Centauro through the 05 V11 Sports. Dealer? Don't need no steenkin dealer.. Wish I had a local dealer like that..
Seriously, Guzzi parts are a walk in the park to get, even for some really old stuff.
The turnsignals are also the same as Buell, as is the headlight and trim ring on the Skorpion tour.

Oh, I'm 99% sure the tail light is the same as the Ducati Monster.

[tigcraft]

Talking of tail lights I still haven't found a substitute for the sport after many hours hunting on the web since I need one.

[crunchybits4]

I am pretty sure the tail light for a sport is the same as a 600ss Ducati

[tigcraft]

I am pretty sure the tail light for a sport is the same as a 600ss Ducati

It's nothing like. Everyone says that. For the tour it's the same as Ducati but not mine

[netguz]

It's nothing like. Everyone says that. For the tour it's the same as Ducati but not mine

http://www.grahamsmotorcycles.com/2010% ... _Light.htm shows the difference.

If I were you tig, I'd go down to my local general bike bits emporium and try to match up a generic rear light to yours, then ask which bikes it fits. That's how I found that the 650 Bandits clutch cable fits the Tour.

To be honest, the inner could do with being a cm shorter, but as it only cost a tenner, who cares?

PS, around about 2000 I lived in Hebden Bridge.

[tigcraft]

It's nothing like. Everyone says that. For the tour it's the same as Ducati but not mine

http://www.grahamsmotorcycles.com/2010% ... _Light.htm shows the difference.

If I were you tig, I'd go down to my local general bike bits emporium and try to match up a generic rear light to yours, then ask which bikes it fits. That's how I found that the 650 Bandits clutch cable fits the Tour.

To be honest, the inner could do with being a cm shorter, but as it only cost a tenner, who cares?

PS, around about 2000 I lived in Hebden Bridge.

Hebden bridge? Tis a small world.
At the moment I'm not stuck as I managed to repair the lens very well but as we all know these bikes shake things to death.
I will go for a nosey at some point to check out the selection although part of me likes the 'hunt' on eBay for cross reference parts. There are a lot of very similar Italian manufactured lights of old that just could do but I work on classic vehicles so it's a habit of mine to keep at it.

[tigcraft]

Bump

[DAVID THOMPSON]

more info please on 650 Bandits clutch cable fits the Tour.
year and info to nail down which bike it is
i need one for my traveller and a tour should fit
and there is a Suzuki dealer about 2 miles from my house

Dave

[netguz]

no idea which model Bandit, I just took mine in, they matched it, I fitted it and rode on. I suggest you do the same.

[DAVID THOMPSON]

the year model of Bandit, your cable came from..

we get some bikes here in the states but many here are not the same as yours

i can ask for a bandit cable and it may not look like yours even if i ask for the same year

sorting parts here is a crap shoot

dave

[netguz]

The bandit cable came from a general parts shop, it's a pattern part, ans as said I took it in and they matched it up. It may fit a Traveller but it's the cable that goes round the front of the instruments, so may be difficult on a Trav.

Good luck

[jimc]

JT Sprockets catalog includes MZ.
Searching part numbers = lots of USA sources.
Checkit out...
http://www.jtsprockets.com/catalogue/
http://www.jtsprockets.com/catalogue/model/4753

[tigcraft]

Bump!

[Hooperman999]

What about replacement throttle grip and switch cluster - any ideas - plugs need to fit correctly too