MZ Baghira / KTM 640 Adventure Bodywork

[breakwellmz]

Came across this on Gumtree -
https://www.gumtree.com/p/cars-vans-mot ... NMARKETING

[handsomejackuk]

i wonder what gear lever is on that...?

has anyone managed to get a better lever to fit, as mine is a bit home made...

suggestions please..

[breakwellmz]

That`s the setup i have on mine (No linkage) Will try and find out what i used and where it came from.

[breakwellmz]

Looks like it was one of these -
https://www.motorcycleproducts.co.uk/ge ... gJ5KPD_BwE

[DAVID THOMPSON]

this makes the shift order reversed so warn others if you let them ride it
???

[breakwellmz]

It doesn`t change the shift pattern David.

Cheers.

[DAVID THOMPSON]

mine is a traveller and i thought it would make first as one up if that linkage that is a fuss to make work
was done away with

[Puffs]

Removed

[breakwellmz]

Linkage on Skorpion is different to Baghira/Mastiff one.

viewtopic.php?f=3&t=7530&start=15

[handsomejackuk]

thanks i know what to get now mine looks really ugly i try and get something like that now.... yz250...

Looks like it was one of these -
https://www.motorcycleproducts.co.uk/ge ... gJ5KPD_BwE

[breakwellmz]

I will check today the measurements of the one i actually fitted and get back to you, i seem to think i had more than one attempt at getting it right(or that could have been another bike altogether!)

[breakwellmz]

Hi, sorry for delay.
Its looks like it`s the upper one i fitted in the link i forwarded.
It puts the centre-line of the toe end of the lever 200mm to the centre-line of the footrest (My Beta has 190mm) fine for my size tens!

Cheers

[handsomejackuk]

thats sounds good i measured mine last night, i cant remember what the offset was but the one you suggested sounds like its what i need...

thanks....Al...

[breakwellmz]

I got in touch with the seller of the MZ/KTM some while ago to ask him about his carb mods, this was his reply -

"The new carb is for the Yamaha Raptor/Grizzly 660. It fits the existing inlet/outlet rubbers. The mixture was set using a lambda sensor to get the jetting/needle position right. The original carb + cables come with the bike, so it could easily be returned to standard. I found the old carb hard to setup, or rather, once set it would 'drift' over time and need resetting. The new carb might not give as much top-end, but that wasn't a problem for me"

[7inarow+]

Hi all I’ve just come across this thread.
I brought this bike in July 22, it’s been a pain but fun, up and running even though I’ve got a list of stuff still to do.