MZ/MuZ Riders
A community for owners and riders or MZ Motorcycles, Scooters, and ATVs.
Aluminium treatment
Moderators: DAVID THOMPSON, phlat65
6 posts
• Page 1 of 1
Aluminium treatment
by JawasandMZs » Wed Feb 10, 2021 6:17 pm
Anyone found a cure for furred alloy, typically on the lower forks?
- JawasandMZs
- Posts: 95
- Joined: Wed Nov 04, 2020 12:30 pm
Re: Aluminium treatment
by Blurredman » Thu Feb 11, 2021 3:51 am
Paint! 
1973 MZ ES250/2 - 17,000 miles
1979 Suzuki TS185ER - 9,000 miles
1981 Honda CX500B - 91,000 miles
1987 MZ ETZ300 - 38,000 miles
1989 MZ ETZ251 - 50,000 miles
ftp://blurredmanswebsite.ddns.net/Vehicle_Documents/MZ_Documents/
1979 Suzuki TS185ER - 9,000 miles
1981 Honda CX500B - 91,000 miles
1987 MZ ETZ300 - 38,000 miles
1989 MZ ETZ251 - 50,000 miles
ftp://blurredmanswebsite.ddns.net/Vehicle_Documents/MZ_Documents/
-
Blurredman - Posts: 1253
- Joined: Sat Feb 09, 2013 3:59 pm
- Location: South Wales
Re: Aluminium treatment
by AlanJ » Tue Feb 16, 2021 7:40 am
Hi,
As aluminum oxidises immediately it is lightly sanded ( when it/s whitened it usually doesn't oxidise further) and then you require an etch primer and then a top coat or two of silver, and I would suggest a car alloy wheel spray can, anti-chip etc.
Stay safe Alan.
As aluminum oxidises immediately it is lightly sanded ( when it/s whitened it usually doesn't oxidise further) and then you require an etch primer and then a top coat or two of silver, and I would suggest a car alloy wheel spray can, anti-chip etc.
Stay safe Alan.
-
AlanJ - Posts: 322
- Joined: Wed Jan 27, 2016 11:31 am
- Location: Somersham Huntingdon Cambridgeshire
Re: Aluminium treatment
by DAVID THOMPSON » Tue Feb 16, 2021 10:52 am
1960 and 70 BMW engine cases
clean up nice with a brass bristle brush
and 409 cleaner lots of clean water
wipe down with olive oil
but do not do it too often
just to get a nasty barn find looking better
never polish a BMW engine out till its smooth
in areas where its very hot it makes them run too hot
clean up nice with a brass bristle brush
and 409 cleaner lots of clean water
wipe down with olive oil
but do not do it too often
just to get a nasty barn find looking better
never polish a BMW engine out till its smooth
in areas where its very hot it makes them run too hot
Dave 2002 MZ RT125+1995 Saxon Tour(500cc)
1997 MZ 660 Traveller+6/13/09 WV USA
"IN the end times the IDIOTS will be in charge
of everything"
"I like the road less traveled if it's PAVED!"
wd8cyv at yahoo dot com
1997 MZ 660 Traveller+6/13/09 WV USA
"IN the end times the IDIOTS will be in charge
of everything"
"I like the road less traveled if it's PAVED!"
wd8cyv at yahoo dot com
-
DAVID THOMPSON - Moderator
- Posts: 5162
- Joined: Sun Nov 23, 2003 11:01 am
- Location: Parkersburg, West Virginia USA .questions answered MZ 95 up, BMW 1953 to 1979 and ham radio WD8CYV
Re: Aluminium treatment
by tigcraft » Tue Feb 16, 2021 4:15 pm
Those are interesting points there Dave.
ETZ250, ts150, ts250, Other toys.....Trx850...Bonneville SE...Bmw f800gt bmw Rockster ...X7...GSX250KATANA ...TL1000
- tigcraft
- Posts: 332
- Joined: Mon May 17, 2010 4:22 pm
- Location: Holmfirth in West Yorkshire
6 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 6 guests