Rough ts 150

This is the forum for general motorcycle talk.
Introduce your self here, tell us about your bike and maybe find other enthusiasts to ride with.

Moderators: DAVID THOMPSON, 125SMash, phlat65

Rough ts 150

Postby JawasandMZs » Mon Mar 15, 2021 4:28 pm

My mz ts 150 seems rough and noisy compared to my ETZ250. I know it's 100% ok as it's been dismantled and had all the friction surfaces checked and the crank replaced with new seal and bearings.
Still it's noisy, especially on the left side like the primary chain is slapping around.
Is this only to be expected from such an old, primitive bike?
Anyone know?
JawasandMZs
 
Posts: 95
Joined: Wed Nov 04, 2020 12:30 pm

Re: Rough ts 150

Postby Gerryman Ts125 » Wed Mar 17, 2021 9:52 am

All my Ts125/150 powered Mz's all used (one still does) sound like a couple of bolts are loose inside the clutch side. As far as I know, there is no adjustment of the transfer chain. So they all rattle like crap. If you fill the gearbox with any oil other than Hypoid Sae90, it gets worse. I. E. like there is no oil in the gearbox at all. If your clutch has become very sloppy, the chain may be worth changing. Or the bearings, if you decide to investigate further. Have not driven my Ts125 on the road since 1990, but in my trips around my lockup, you cannot differentiate any sound over another one (unless it is sitting still ticking over).
As it is very archaic. It was never the smoothest of gearboxes, although when new and unhindered, it sounded much, much, much quieter than today. As it sounds like a tractor :-D
`I stink therefore I have a old bikers jacket that`s alive`
User avatar
Gerryman Ts125
 
Posts: 130
Joined: Fri May 08, 2020 9:42 am

Re: Rough ts 150

Postby JawasandMZs » Wed Mar 17, 2021 5:16 pm

Thanks Gerry. I was in fact thinking that the time-honoured habit of using regular engine oil as g/box shouldn't apply to MZs. The minimal extra drag .. who cares?
Having no guides/tensioners on the ts, well that's just cheap old motors.
Gonna change to heavy oil and enjoy antagonising the neighbours with the noize.
JawasandMZs
 
Posts: 95
Joined: Wed Nov 04, 2020 12:30 pm

Re: Rough ts 150

Postby Puffs » Thu Mar 18, 2021 4:05 am

Following a biased and flawed moderator choice (someone posting aggressive personal attacks is rewarded, while my technical posts are removed - behind my back & without any justification!), I have withdrawn from this forum.
Last edited by Puffs on Wed Apr 05, 2023 4:30 am, edited 1 time in total.
User avatar
Puffs
 
Posts: 2007
Joined: Tue Jan 16, 2018 11:20 am
Location: Ardennes, Belgium.

Re: Rough ts 150

Postby oakgray » Tue Apr 20, 2021 9:57 pm

Were you able to resolve the issues of your TS 150 ?
oakgray
 
Posts: 6
Joined: Mon Apr 19, 2021 6:55 pm

Re: Rough ts 150

Postby Blurredman » Wed Apr 21, 2021 5:25 am

Puffs wrote:Using non-MA engine oil may cause a wet clutch to slip.



Even using MA engine oil has caused both my etz's plates to slip.
1973 MZ ES250/2 - 17,000 miles
1979 Suzuki TS185ER - 9,000 miles
1981 Honda CX500B - 91,000 miles
1987 MZ ETZ300 - 38,000 miles
1989 MZ ETZ251 - 50,000 miles

ftp://blurredmanswebsite.ddns.net/Vehicle_Documents/MZ_Documents/
User avatar
Blurredman
 
Posts: 1246
Joined: Sat Feb 09, 2013 3:59 pm
Location: South Wales

Re: Rough ts 150

Postby Puffs » Wed Apr 21, 2021 5:48 am

Following a biased and flawed moderator choice (someone posting aggressive personal attacks is rewarded, while my technical posts are removed - behind my back & without any justification!), I have withdrawn from this forum.
User avatar
Puffs
 
Posts: 2007
Joined: Tue Jan 16, 2018 11:20 am
Location: Ardennes, Belgium.


Return to Main Lobby

Who is online

Users browsing this forum: No registered users and 18 guests