I can't get my turn signals to work?!?

[baroquenride]

So my turn signals used to work, but went out...as in nothing works anymore. I can't figure it out. The 7.5 amp fuse blew so I replace it, but they still don't work. I've pulled the relay, tested it using this video: https://youtu.be/HdERp5e78eM and it works properly so now I'm stuck and not sure where to look.

[Puffs]

Removed

[baroquenride]

So I started in again today and began using a multimeter continuity test. Long story short, I discovered a broken 3A fuse. Despite there being a label of the fuse sizes on the inner fender, it doesn't say what is for what. Regardless, I swear that I checked each fuse for continuity and the 7A fuse was discovered bad so that's what I was focused on. I knew it was fine after replacing it, the relay was fine, and all the other fuses were fine.....nope. Anyway, I replaced the 3A fuse, discovered a broken ground in one of the turn signal wires after 3 of the bulbs were working and fixed that final problem. Now it appears the turn signal circuit is working again.

[fish]

Congratulations. I hate electrical problems. Glad you fixed yours.
A friend of mine fixed his malfunctioning turn signals by cleaning all the contacts in the headlight shell.