Looking in the U.S. for ISDT parts, bikes, and anything associated with MZ ISDT. I am in need of a top end, cylinder, head, piston, rings for 90% bike I’m working on. I also need some carburetor parts, float, needle, gaskets, etc.
If you have any of the above please let me know.
MZ/MuZ Riders
A community for owners and riders or MZ Motorcycles, Scooters, and ATVs.
ISDT parts, bikes, etc
Moderators: DAVID THOMPSON, phlat65
2 posts
• Page 1 of 1
ISDT parts, bikes, etc
by 1sogdusm » Tue Dec 19, 2023 1:26 pm
- 1sogdusm
- Posts: 7
- Joined: Tue Apr 04, 2017 9:33 pm
Re: ISDT parts, bikes, etc
by Guesi » Wed Dec 27, 2023 1:19 am
Hello
Pistons can be used from the "normal" ES250/2 models.
They can be adapted for the ISDT.
About 175 bottom end for the 250 ISDT... It should work, but as the 250 ccm piston is heavier than the 175 ccm piston, the balancing of the crankshaft is not the same which results in more vibrations if you use the "wrong" piston size.
Pistons can be used from the "normal" ES250/2 models.
They can be adapted for the ISDT.
About 175 bottom end for the 250 ISDT... It should work, but as the 250 ccm piston is heavier than the 175 ccm piston, the balancing of the crankshaft is not the same which results in more vibrations if you use the "wrong" piston size.
- Guesi
- Posts: 459
- Joined: Sat May 15, 2010 2:12 am
2 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 20 guests