well the bike let u know it's time to Mod
Regards
MXsteven 
MZ/MuZ Riders
A community for owners and riders or MZ Motorcycles, Scooters, and ATVs.
Malaysian - MZ 125SM
Moderators: DAVID THOMPSON, phlat65
by mxsteven » Wed Sep 27, 2006 12:01 am
well the warranty thing i dont really know coz my bike warranty void since day one
well the bike let u know it's time to Mod
Regards
MXsteven
well the bike let u know it's time to Mod
Regards
MXsteven Where u go, it's up to u,
Where u ride, it's in ur hand,
What u think, it's in ur mind,
Think b4 u do, Ride safe.
MXsteven
Where u ride, it's in ur hand,
What u think, it's in ur mind,
Think b4 u do, Ride safe.
MXsteven
-
mxsteven - Posts: 280
- Joined: Mon May 23, 2005 2:29 pm
- Location: Malaysia, KL, Damansara Utama.
by DirtGrinder666 » Wed Sep 27, 2006 10:59 pm
ha ha .. i forgot bout that .. ! U've disassembled ur bike parts on day two.. Yep... the meter shows its time to mod the bike ..!
Hmn.. I met an accident last night near PGRM building in Cheras with a Naza Blade 250cc .. this stupid guy try to take a sudden turn in front of me.. I put on the emergency brake and try to avoid the bike.. lucky me it was just the foot brake paddle twisted and turning into a "U" pattern.. damn.. I've already fix it.. and the real lucky part is .. I hit this guy bike quite hard but I dont know how the hella I just got a single scratch on my right leg ..
pheww... I'm not sure wether I got super power... hahaha ! -STOCKBIKERS if you know what i mean-
-
DirtGrinder666 - Posts: 80
- Joined: Fri Sep 01, 2006 5:49 pm
- Location: K.L , Malaysia
by jbthumper » Thu Sep 28, 2006 5:48 am
are you sure that the guy you hit wasn't someone we know??
bout the warranty thingy....wear n tear part are not covered....but the headlight frying thingy...must check rectifier,charging coil and connection(all if possible, ie. bulb socket,switch,connectors etc..) because those things costs big time if blown after warranty. Though there're substitutes, but that's.......another story.......(needs a new thread for it hehe)
bout the warranty thingy....wear n tear part are not covered....but the headlight frying thingy...must check rectifier,charging coil and connection(all if possible, ie. bulb socket,switch,connectors etc..) because those things costs big time if blown after warranty. Though there're substitutes, but that's.......another story.......(needs a new thread for it hehe)
-
jbthumper - Posts: 319
- Joined: Tue Mar 23, 2004 3:59 am
- Location: Malaysia
by janraafi » Thu Sep 28, 2006 7:15 am
Yesterday i went to the service center..real lazy ass mechanics was there...he only able to change my oil and tyre...dam slow work ...talk a lot..i ask him to do full service include change the coolan..spoket n chain,but until the last minutes he said tak sempat la bang....and he charges me RM30 for labour cos....and the total was RM200+++..I THINK this will be my last visit...better ask a good out mechanic to do..not even setting he did not do...bagero...so today i went to sentul to buy chain and spoket...spoket and RKM chain cos me RM 120... 
-
janraafi - Posts: 65
- Joined: Fri Jun 09, 2006 1:53 am
- Location: Ampang,Malaysia
cost
by DAVID THOMPSON » Thu Sep 28, 2006 6:16 pm
just the o ring chain i put on my rt125 last year was 76 usd
check out the exchange rate the rear sprocket was $64 usd
these bikes are so easy to work on you fellows that live close to each other
need to get together and hold classes on how to do the simple stuff
here in my area no shops will even work on mine because they have never heard of an mz ...it is at least 150 km to any one else that owns one
ar dave
76.00 USD
United States Dollars = 279.938 MYR
Malaysia Ringgits
check out the exchange rate the rear sprocket was $64 usd
these bikes are so easy to work on you fellows that live close to each other
need to get together and hold classes on how to do the simple stuff
here in my area no shops will even work on mine because they have never heard of an mz ...it is at least 150 km to any one else that owns one
ar dave
76.00 USD
United States Dollars = 279.938 MYR
Malaysia Ringgits
Dave 2002 MZ RT125+1995 Saxon Tour(500cc)
1997 MZ 660 Traveller+6/13/09 WV USA
"IN the end times the IDIOTS will be in charge
of everything"
"I like the road less traveled if it's PAVED!"
wd8cyv at yahoo dot com
1997 MZ 660 Traveller+6/13/09 WV USA
"IN the end times the IDIOTS will be in charge
of everything"
"I like the road less traveled if it's PAVED!"
wd8cyv at yahoo dot com
-
DAVID THOMPSON - Moderator
- Posts: 5161
- Joined: Sun Nov 23, 2003 11:01 am
- Location: Parkersburg, West Virginia USA .questions answered MZ 95 up, BMW 1953 to 1979 and ham radio WD8CYV
by DirtGrinder666 » Thu Sep 28, 2006 8:09 pm
yeah.. thanks for the informative tips Dave..
Din : Nah.. the stupid guy who i'd hit not someone we know.. or one of our friends..
Yep.. am going to the MZ center just to check my cable connections etc before the warranty end ...
-STOCKBIKERS if you know what i mean-
-
DirtGrinder666 - Posts: 80
- Joined: Fri Sep 01, 2006 5:49 pm
- Location: K.L , Malaysia
by mxsteven » Fri Sep 29, 2006 4:31 am
i told u not to go to MZ center to service except warraty claim..... now you got em right through ur a$$ .... hehehe...
Okay... about the rectifier you may check it using a volt meter make sure the voltage doesent exceed 15v @5000/7000rpm which in maximum state should be 14.8v for dry cell and 13.8v @ 5000/7000rpm for wet cell.... and it should not charge lower than 13.5 @ 5000rpm
regards
MXsteven
.... hehehe...
Okay... about the rectifier you may check it using a volt meter make sure the voltage doesent exceed 15v @5000/7000rpm which in maximum state should be 14.8v for dry cell and 13.8v @ 5000/7000rpm for wet cell.... and it should not charge lower than 13.5 @ 5000rpm
regards
MXsteven
Where u go, it's up to u,
Where u ride, it's in ur hand,
What u think, it's in ur mind,
Think b4 u do, Ride safe.
MXsteven
Where u ride, it's in ur hand,
What u think, it's in ur mind,
Think b4 u do, Ride safe.
MXsteven
-
mxsteven - Posts: 280
- Joined: Mon May 23, 2005 2:29 pm
- Location: Malaysia, KL, Damansara Utama.
by DirtGrinder666 » Fri Sep 29, 2006 3:05 pm
woah... how to do that Steve ? I dont have the gadgets .. 
Oh yeah .. how to set the monoshock spring since the factory standard is only set to a person who weight at 75kg .. I'm 87kg
ha ha ha ! There's seems to be 2 nuts/washers (or whatever you call it) which one I should adjust or I need some special tools ? -STOCKBIKERS if you know what i mean-
-
DirtGrinder666 - Posts: 80
- Joined: Fri Sep 01, 2006 5:49 pm
- Location: K.L , Malaysia
by kam » Sat Sep 30, 2006 11:38 am
Hello fellow MZer,
Registered and I've been reading this forum for years but never post a single message. Just wanna share some experience with MZ service center at Glenmarie. Never ever go there to get your bike service. They are not lazy , just they too occupied with so many bikes came in everyday to get service under warranty. But i never deny their customer service is lousy. Last time I was there to get my both tyres change. They let me wait over 2 hours just to change front tyre and still charged me RM30 for half work done. Terrible! Then I took the rear tyre to other workshop and get it done less than half an hour and charged me just RM10.
What i normally do is, I will buy parts from their spare part department and do the service outside at other motorcycle workshop. I have my fav mechanic at Ukay Perdana. He did my bike all over again when I involved in accident twice last year. The price of the spare parts at MZ service aren't so bad. If you buy during promotion you will get extra discount. And those people in that department are very friendly too. You can call just to check the price while comparing with the price of the same component outside.
Registered and I've been reading this forum for years but never post a single message. Just wanna share some experience with MZ service center at Glenmarie. Never ever go there to get your bike service. They are not lazy , just they too occupied with so many bikes came in everyday to get service under warranty. But i never deny their customer service is lousy. Last time I was there to get my both tyres change. They let me wait over 2 hours just to change front tyre and still charged me RM30 for half work done. Terrible! Then I took the rear tyre to other workshop and get it done less than half an hour and charged me just RM10.
What i normally do is, I will buy parts from their spare part department and do the service outside at other motorcycle workshop. I have my fav mechanic at Ukay Perdana. He did my bike all over again when I involved in accident twice last year. The price of the spare parts at MZ service aren't so bad. If you buy during promotion you will get extra discount. And those people in that department are very friendly too. You can call just to check the price while comparing with the price of the same component outside.
Last edited by kam on Sat Sep 30, 2006 11:54 am, edited 1 time in total.
- kam
- Posts: 6
- Joined: Tue Oct 11, 2005 11:29 pm
- Location: Mont Kiara, Kuala Lumpur
by mxsteven » Sat Sep 30, 2006 1:17 pm
Yo man, Yo dude, Yo Guys, Yo Yo Yo.... sorry i dont play YoYo
hey mister Dirt little Grinder.... if you wanna 2 set your absorber damping then you will need to know what is your mainly riding style....
Welcome back mr Kum.....if anyone of youn in Sri Hartamas ls let me know coz i will be in the GYM there most of the time!!! my bike is ready but now im doing more things..... coz since i have still no time to ride so i spend some of my time do the remaining mod which i wanna 2 do long time ago!
This nex sadderday im not free coz i will be in Raub preparing my best friend wedding... will be BZ on 7th oct, 14th oct, 17th oct, 21-24oct.... coz i will be in raub, yong peng, kluang and Kenyir lake land (for fishing) after that im FREE..
regards
MXsteven
hey mister Dirt little Grinder.... if you wanna 2 set your absorber damping then you will need to know what is your mainly riding style....
Welcome back mr Kum.....if anyone of youn in Sri Hartamas ls let me know coz i will be in the GYM there most of the time!!! my bike is ready but now im doing more things..... coz since i have still no time to ride so i spend some of my time do the remaining mod
which i wanna 2 do long time ago!
This nex sadderday im not free coz i will be in Raub preparing my best friend wedding... will be BZ on 7th oct, 14th oct, 17th oct, 21-24oct....
coz i will be in raub, yong peng, kluang and Kenyir lake land (for fishing) after that im FREE..
regards
MXsteven
Where u go, it's up to u,
Where u ride, it's in ur hand,
What u think, it's in ur mind,
Think b4 u do, Ride safe.
MXsteven
Where u ride, it's in ur hand,
What u think, it's in ur mind,
Think b4 u do, Ride safe.
MXsteven
-
mxsteven - Posts: 280
- Joined: Mon May 23, 2005 2:29 pm
- Location: Malaysia, KL, Damansara Utama.
by janraafi » Sun Oct 01, 2006 1:59 am
Guys need opinion..im trying to change my front fairing/cover giving another face lift...please respon/comment..cun or not.. 
- Attachments
-
- My heart(029).jpg (131.68 KiB) Viewed 5638 times
-
- My heart(027).jpg (140.28 KiB) Viewed 5638 times
-
- My heart(026).jpg (50.56 KiB) Viewed 5638 times
-
janraafi - Posts: 65
- Joined: Fri Jun 09, 2006 1:53 am
- Location: Ampang,Malaysia
by mxsteven » Sun Oct 01, 2006 6:21 am
errrrrr i would say i still prefer the stock ones.... this ones looks like your bike had a G-string on it hahahaha
well it also looks a bit like fly_aKa_LaLaT..... HahHahHhahHahhhah...
OkOkkkk... it's looks ok actually... but for my point of view im still sticking to the stock....
Regards
MXsteven without G-string
well it also looks a bit like fly_aKa_LaLaT..... HahHahHhahHahhhah...
OkOkkkk... it's looks ok actually... but for my point of view im still sticking to the stock....
Regards
MXsteven without G-string
Where u go, it's up to u,
Where u ride, it's in ur hand,
What u think, it's in ur mind,
Think b4 u do, Ride safe.
MXsteven
Where u ride, it's in ur hand,
What u think, it's in ur mind,
Think b4 u do, Ride safe.
MXsteven
-
mxsteven - Posts: 280
- Joined: Mon May 23, 2005 2:29 pm
- Location: Malaysia, KL, Damansara Utama.
Who is online
Users browsing this forum: No registered users and 0 guests